PC-3000 Portable III Systems
PC-3000 Portable III Systems
ALL-NEW SOLUTIONS TO RECOVER AS MUCH DATA AS POSSIBLE IN A DATA RECOVERY COMPANY OR DIGITAL FORENSICS LAB
PC-3000 Portable III System is a hardware-software solution intended for diagnostics, repair and data recovery from HDDs with issues caused by hardware malfunctions and corruption of file systems occurring on the logical level. Together with the ACE Lab’s software products, PC-3000 Portable III forms
the systems to recover data from SATA/USB HDD, RAID and SSD both in the lab and on-site:
►►Possibility to connect the devices based on SATA-III (compatible with SATA-I/II) and USB interfaces corresponding to the Mass Storage Device classification: external USB 2.0/3.0 HDD and USB Flash drives
►►Ability to use PC-3000 Portable as a standalone system to create data images that contain HDD, SSD*, and USB Flash media snapshots even without a host computer
►►All operations are logged and outputted to a report that can be saved or printed later
►►A full-featured mode is available when using a host computer (similar to the PC-3000 Express and PC-3000 UDMA modes). Besides, you will be able to use a simplified mode which makes the job easier and better organized
►►Support of M.2 PCIe NVMe SSD* thanks to the special universal adapter
A ONE-OF-A-KIND TOOL FOR DAMAGED STORAGE MEDIA
Hardware-software systems to recover data from logically or/and physically damaged SATA / PATA/ USB Hard Disk Drives, SATA / M.2 PCIe NVMe Solid State Drives, and RAID. Especially if the customer's data is too sensitive to be taken out of the office.
PERFECTLY EFFICIENT FOR ON-SITE DATA RECOVERY
Use the PC-3000 Portable both with a desktop computer in your lab and a laptop or in a Standalone Mode at your customer’s location. With 2 active licenses, you are able to arrange your workstation wherever you need it!
4 DIAGNOSTIC PORTS TO RECOVER DATA FROM 3 DRIVES AT THE SAME TIME
Connect your storage media directly via the PC-3000 Portable III source ports: USB, SATA, PATA, PCIe, NVMe.
In certain modes, you may also use them to increase to 3 the number of devices you deal with at the same time. Max speed of SATA ports: up to 360 MB/s
TARGET SATA1 AND SATA2 PORTS FOR DATA IMAGING TO DESTINATION DRIVES
BREAKTHROUGH: M.2 PCIe NVMe SSD SUPPORT!
The world’s only solution to deal with damaged NVMe SSDs! Stay ahead of your competitors: diagnose the condition of NVMe SSDs and recover data from such damaged devices thanks to a special universal M.2 PCIe NVMe SSD / M.2 SATA SSD adapter included in the delivery kit.
FASTER AND EASIER WORK WITH USB HDD/SSD/FLASH DRIVES
Save time during data recovery from partially damaged USB HDDs and SSDs. In most cases, you do not need to search for a donor PCB or solder the SATA interface since the OS doesn’t influence a drive, the reading of the drive with many bad sectors and freezes is stable, and the tech commands are fully supported via the USB interface.