+65 6747 4469

55 Ubi Avenue 1, UBI 55, #06-09, Singapore 408935

©2019 by DataExpert Singapore Pte Ltd.

Key Features 

The PC-3000 SAS 6 Gbit/s Controller

The new High Performance SAS controller PC-3000 SAS is a PC extension board for the PCI Express x4 bus that takes two adjacent slots which allows for working with four HDDs simultaneously. Four independent channels provide up to a 6 Gbit/s data transfer rate for each channel according to the SAS-2.0. The data transfer speed depends on the speed of the connected drives.

Working with SATA HDD, SSD
The PC-3000 SAS 6 Gbit/s controller allows you to connect SATA HDDs and SSD in read-write modes, test their surface, copy data, and make the image copies at maximum possible speed.

 

Intelligent Power Supply Unit
A 4-channel Power Supply Unit is used to power the HDDs which are connected to PC-3000 Express. The Power Supply Unit protects the HDDs from overvoltage and overcurrent. In case of emergency, the HDDs will be powered off automatically. Furthermore, each channel has feedback with the PC-3000 software for monitoring the stability of +5V and +12V voltage supply and informing the user about any problems in power circuits.The intelligent Power Supply Unit of PC-3000 SAS 6 Gbit/s has the following features for advanced HDD diagnostic and troubleshooting. The oscilloscope functionality. You can get a graph visually representing the precise information about the current power status in real time.This feature allows to perform advanced HDD diagnostic and determine the cause of failure. The Power Supply Unit is equipped with a sound speaker which signals about the PC power supply unit failure or HDD overcurrent. Triggered protection system turns off the voltage on the corresponding channel.

 

Resource Management of the PC-3000 SAS board

The PC-3000 SAS 6 Gbit/s allows to launch the PC-3000 utility and Data Extractor tasks as separate OS processes. The "PC-3000 SAS Resource manager" software makes using the PC-3000 SAS 6 Gbit/s very easy and effective. It manages port and related process activity, controls the status of the ports, checks process conditions and kills processes if necessary. Once a process is started it can use any of the available ports on the PC-3000 SAS board. For instance, four processes can be used for every port or one process can use four ports etc.

 

 

PC-3000 SAS 6 Gbit/s

  • The PC-3000 SAS 6 Gbit/s is a hardware-software solution intended for testing and restoring damaged HDDs with SAS (Serial Attached SCSI) or SCSI based interfaces.

    The PC-3000 SAS 6 Gbit/s coupled with the Data Extractor SAS forms the PC-3000 SAS 6 Gbit/s Professional System, which allows you to recover data from SAS or SCSI based HDDs. To repair these HDDs, you only need the PC-3000 SAS 6 Gbit/s – for data recovery you need both the PC-3000 SAS 6 Gbit/s and the Data Extractor SAS.

  • Form factor: Embedded PC expansion board which uses two adjacent slots

    Interface type: Four-channel PCI Express 2.0 5 Gbit/s

    Diagnostic ports (location): 4 - SAS (internal)

    Maximum Data Transfer Speed: 600 MB/sec for each port

    Power adapter: four-channel adapter with protection, the oscilloscope functionality and the measurement of the voltages and currents values. HDD connectors are internal.

    Supported HDD: from 18 GB to 10 TB; 3.5", 2.5"

    OS Platforms: Windows 7 (starting from SP1), Windows 8, Windows 10; х86, х64

    Recommended PC configuration:
    CPU: Intel Core i5
    RAM: 8GB
    Storage configuration: 1 TB HDD
    LCD Monitor: 22", 1920x1080

 

CONTACT US